Close

904.269.0202

inc. 24-hr emergency

RSS

Blog posts tagged with 'Sta Rite'

Sta Rite Water Pump: Make Sure It’s Right for You- Friday, June 5, 2015

There are many different types of Water Pumps out on the market today ranging from ones you can buy at your local Home Depot to the ones you can only by from Authorized Distributors. Just like anything else these pumps differ by factors like Quality and Price. When you take a look at these two factors you will see that a Sta Rite Water Pump is a great investment. Let’s take a look at a few different types of Sta Rite Pumps that can make a difference in your Irrigation and Water Supply at home.

 

Shallow Well

The first Sta Rite Pumps we are going to take a look at will be the Shallow Jet Models. The Shallow Well Pumps are very versatile and can be used for Home, Farm and Irrigation applications. These Pumps are best suited for use with Wells that are 25 feet deep or less. These are able to provide awesome performance and great water pressure for you water needs. These Sta Rite Shallow Jet Pumps come in a few different models that differ in Horse Power to be able to handle different loads.  All of these Pumps are Single Phase.

 

Below are the Shallow Well Jet Pumps that Sta Rite makes:

 

SNC

SND

SNE

SNF

HNE

 

Deep Well

Now we are going to take a look at the Sta Rite Deep Well Pump Models. Much like the Shallow Well models that Sta Rite makes, its Deep Well Pumps are very versatile and can be used for everything from Sprinkler to Farm applications. These Pumps will work perfectly with wells that are deeper than 25 feet. These Sta Rite Deep Well Pumps allow you to get great performance while getting excellent water pressure for whatever application you need. These particular Sta Rite Pumps are also Single Phase.

Below are the Deep Well Jet Pumps that Sta Rite makes:

 

SLC

SLD

SLE

SLF

Tags :  Sta RiteSNCSNDSNE SNFHNESLCSLDSLESLFSta Rite Deep WellSta Rite Shallow Well
Comments (0)
How to Clean Clogged Impeller- Tuesday, December 16, 2014


*Make sure to disconnect all power to your Pool Pump Before doing anything else*

1. Many Pool Pumps will have a clamp or a nob that will allow you to remove the Pool Pump from the Water System.

Remove Pump
*When pulling off motor from pump the motor may be hot so be careful*

* Make sure water valves are closed so area doesnt flood*

2.Grab the back of the motor and pull it away from the Water System. (You may have to wiggle it at first)

3.Now you will need to remove the Diffuser which is covering the Impeller. You will need to unscrew the Diffuser from the Pump.


Diffuser Impeller Diagram


4. Now that the Impeller is exposed you need to look at it and identify what is clogging it.

Clogged Impeller


5. Once you identify it, take a wire or something that you can fit in through the side of the impeller to get the debri out.

*Pliers can also be helpful to get debri out.

6. Once the Impeller is clean you will need to reattach the Diffuser and tighten all of its screws

7. Reattach pump to Water Filter system

8. Tighten Clamp or Nob to secure Pump

9. Prime the Pump. Here are instructions
    How to Prime a Jet Pump

10. Make sure to reopen water valves.

11. Turn Power back on

Comments (0)
DIY Replace Shallow Well Jet Pump- Thursday, November 13, 2014

DIY Replace Shallow Well Jet Pump


Removing Old Jet Pump

Step 1 Shut off Electric from Electrical Panel

Step 2 Isolate/ Shut off Water to the House/Building

Step 3 Disconnect Electrical Wires connected to Switch

Step 4 Disconnet Suction Line from the Head of the Pump.

* Tip: Make sure to have Bucket or Tub to catch water

Step 5 Disconnect Water Line going to the Pressure end of the Pump

Step 6 Remove Schraeder Vale to Release Vaccum

Step 7 Open Valve to Drain tank until it empties


Wooo... Now that we got that out of the way it is time to put in your New Shallow Jet Pump . If you don't have one yet check out our selection HERE

Step 1 Check existing Water Connections for any serious alignment issues with New Jet Pump

Step 2 Install Existing Pipe into the Bladder tank of the New Pump

Step 3 Install new Mounting Bracket to Bladder Tank

Step 4 Mount New Shallow Well Jet Pump to Bladder Tank

Step 5 Wrap Telflon Tape around Brass Bushing 3 times for Suction

Step 6 Reinstall Fiited Piping to the Jet Pump Head

Step 7 Reinstall Fitted Piping to Pressure Side of Pump

Step 8 Set pump Electrical Requirements

Step 9 Use Teflon tap to wrap secure pipes together

Step 10 Reconnect Jet Pump to Water Piping

Step 11 Reconnect Electrical Supply

Step 12 Check for Operation and Leaks

Comments (0)